Fishpond Accessories
Arrowhead Retractor
Quite possibly the most purposeful, elegant, and timeless piece of design by mankind is the arrowhead. This iconic treasure brings back visions of our American identity like nothing else. We add to this legacy with a new age tool that is machined and hand-crafted in Colorado. Instead of stone, we use 6060 aerospace aluminum. This could be the most purposeful and useful tool for any angler.
Colours: Black or Moss Green (left to right in image)
Specifications:
- 3.75″ x 1.25″
Features:
- 60/60 aerospace aluminum
- 33″ cord 130lb test braided nylon line, with break strength of 147lbs
- Built in carabiner clip attaches to D-rings, Hypalon® tabs, sternum strap loops, coated webbing, etc.
Colours: Blackrock (in image) or Moss (not shown)
360° Swivel Retractor
Click image to enlarge
Fly-fishing is a game of fooling, and the Fishpond 360° Swivel Retractor is designed to be fool-proof. Once pinned to your vest or pack, it can rotate 360 degrees, thereby keeping what’s attached accessible and untangled. No cord or wire to snap either – the retractor coil hides inside the durable aluminum retractor body until you need it.
Specifications:
- 3.75″ x 0.625″
Features:
- Patented, “push button” locking pin-mount mechanism swivels 360-degrees
- Durable UV protected polyurethane retractor coil
Colours: Lichen (upper in image) or Gunmetal (lower in image)
Riverkeeper Digital Thermometer
Click image to enlarge
When the difference between a lights-out day on the water and a hike in the woods comes down to water temperature, the accuracy of your thermometer is crucial. Compact and easy to handle, the Riverkeeper Thermometer is the only IPX7 submersible-rated digital thermometer designed by and for fly anglers. With a rugged exterior, a large UV-filtered screen, a replaceable battery, and a durable aluminum probe, this thermometer is built to withstand years of rigorous use outdoors. The Riverkeeper is the perfect tool for taking precise temperature readings, helping you determine whether it’s safe to fish and when your quarry might be most active.
Specifications:
- Size: 8.5cm x 3.7cm x 1.5cm)
- Weight: 23g)
- Range: -34°C to 54°C
Features:
- Provides rapid water temperature readings in °C or °F
- Ultrasonically welded, recycled polycarbonate main body with soft silicone outer case
- Large ultrasonic polycarbonate screen with a UV filter
- Replaceable CR2025 battery (included)
- CE-certified and IPX7 submersible rated
- Carabiner-style attachment clip suitable for up to 1″ webbing width
Colours: Grey
Headgate Tippet Holder
Click image to enlarge
When you use Fishpond’s all-new Headgate tippet dispenser, you will wonder why no one has thought of anything like it before. The spring loaded hinge design allows an angler to easily add, remove and carry most tippet spools with ease. Just clip it on somewhere close and forget about the days of fishing through your waders, vest or pack searching for those loose spools. Dropped your nippers on the hike in? Not to worry, the Headgate also features a built in cutting blade for ultimate convenience.
Specifications:
- Fits most standard-size tippet spools
Features:
- Annodized aerospace-grade aluminum
- Retractor/lanyard attachment hole with included clip
- Razorblade line cutter
- Holds up to 7 standard tippet spools
- Secure spring loaded pull for access to change spools
Note: Tippet spools shown for illustration only – not included with holder
Headgate Tippet Holder XL
Click image to enlarge
The all new Headgate XL is an enlarged version of our popular Headgate. The new XL size was designed specifically for holding 4” spools so you can have the same great features as our standard size when you’re saltwater fishing. Also, if you want to hold a larger variety of standard spools, the XL can hold up to thirteen. When you use Fishpond’s Headgate tippet dispensers, you will wonder why no one has thought of anything like it before. The spring loaded hinge design allows an angler to easily add, remove, and carry most tippet spools with ease. Just clip it on somewhere close and forget about the days of looking through your waders, vest, or pack searching for those loose spools.
Specifications:
- 6” x 4.75” (with clip)
- 6” x 3.25” (without clip)
- 9mm diameter aluminum
- Weight: 2.4 oz
Features:
- Anodized aerospace aluminum and stainless steel
- Holds 13 standard spools
- Holds five 4” spools
- Secure spring loaded pull for access to change spools
- Two rubber gaskets for keeping spools secure
- Durable plastic clip can be clipped onto most any Fishpond pack, vest, or gear bag
- Plastic clip can be removed so that the headgate can be threaded through daisy chains or Hypalon® tunnels found on most any Fishpond pack or gear bag
Note: Tippet spools shown for illustration only – not included with holder
Floatant Bottle Holder
Click image to enlarge
Can I borrow some floatant dude? Where’s yours? I don’t know – I think it fell out of my pack somewhere on the trail. Well it’s going to cost you some tasty beverages after we’re done. Hmm.
See…if you had a Fishpond Floatant Bottle Holder, casually hooked to a cord loop or D-ring on your vest or pack, you wouldn’t have been forced into such a deal.
Specifications:
- Fits most standard floatant bottles
Features:
- Quick clip
- Stretchable elastic bottle holder
Colours: Brown Trout (on left in image), Steelhead (Centre) or Cutthroat Orange (right)
Note: Floatant shown for illustration only – not included with holder
Dry Shake Bottle Holder
Click image to enlarge
You’ve got enough fishing to do already – keep your shake handy.
Specifications:
- Accommodates most dry shake bottles
Features:
- Stretchable elastic holds bottles in place
- Quick clip attachment
Colours: Brown Trout (on left in image), Steelhead (Centre) or Cutthroat Orange (right)
Note: Dry Shake shown for illustration only – not included with holder
Quikshot Rod Holder 2.0
Click image to enlarge
A pack of GT’s at 2 o’clock 120’ out and they are coming in hot! Get that bonefish rod out of your hand and grab the 12wt that is neatly tucked onto the side of your pack. With the flip of the FidLock®, the switch has been made and it’s time to strip line, make the shot, and do battle. Having the right tool for the job when you need it is crucial for success. This is why we have designed a clean system that keeps your fully rigged rods fully secured, at the ready, and completely out of your way while fishing. From your favorite trout stream to far-off angling destinations, we have your success in mind.
Specifications:
- 5.5″ x 4.5″ x .56″
Features:
- Updated from our first version, the new 2.0 Quikshot Rod Holder has an improved back attachment for using on Fishpond packs and on wader belts
- Also updated from the previous version, the rod holder has been simplified to no longer use a magnetic release, which means strong winds and heavy reels won’t force the magnetic clasp open
- The new side release buckle is stronger but still opens with the pinch of your fingers
- Thermoformed molded rod holder cradles any size rod handle
- Webbing loop with a polytube overlay for holding the butt of a standard rod or a fighting butt
- Quik release buckle with webbing adjustment secures the rod handle into the rod cradle, and releases your fully rigged rod with just one quick pinch
- Includes upper magnetic closure to add additional stability when using our backpacks
- Adjustable back attachment system will attach to the molded tabs found on many Fishpond products, or to most Wader belts; the system can be adjsuted to fit to 30mm or 50mm width webbing
- Compatible with the Thunderhead Submersible Backpack, Thunderhead Submersible Sling (not recommended for right hand casters), Thunderhead Submersible Lumbar Pack, Cutbank Gear Bag, and Windriver Roll-top Backpack
- Note that all compaible pack models are 2018 or newer
Note: Rod and reel shown for illustration purposes only, not included with rod holder
Lariat Gear Straps
Click image to enlarge
Whether you are hustling through the airport or bashing through the underbrush on the way to the river, you can’t afford to leave anything behind. Keep your rod tubes safe and secure with the Lariat Gear Straps. But, the functionality doesn’t stop there. These highly durable straps can be used to bundle clothing, lash gear to raft frames and even make the unexpected on-river repair.
Specifications:
- Dimensions: 14”x1”
- Useable Length: 4.5” – 11.5”
- Weight: 0.15lb
Features:
- Two straps included
